Are you getting ready to plaster your walls? If you have never plastered your walls before, you will want to make sure you that you know what you should be doing. These simple tips will help you get ready for the job at hand.
Clean The Surface Of The Walls Before You Get Started
If you are going to be plastering your walls, you need to make sure the walls are completely clean. Things like dust and dirt can actually keep the plaster from sticking to your walls.
You should thoroughly clean the walls in your home before you get started. If you scrub the walls clean, you'll be able to ensure that the plaster will stick to the surface. If you clean ahead of time, you'll have less work to do later on.
Completely Wet The Walls Before You Get Started
Plaster requires a wet surface. You need to make sure that the area you're plastering is wet all over. Even one dry spot could keep the plaster from sticking like it is supposed to.
You may want to fill a spray bottle with water. You can spray any part of the wall that isn't wet enough. If the walls you are plastering are highly porous, you may need to wet the walls repeatedly.
Use The Right Kind Of Bonding Agent
Choosing the right bonding agent is an important part of plastering. A lot of experts recommend using a mixture of water and PVA glue. If you want to give the walls a rougher texture, you might want to mix a little bit of concrete in as well.
Keep On Cleaning As You Go
You need to ensure that your tools stay clean while you are plastering your walls. Clean everything, from your trowels to the buckets that you are using. If you work to keep all of your tools clean, you will be able to complete the job without any setbacks.
Start With Water
A lot of people try to add water to their plaster. However, doing this can make it difficult to mix the plaster. You should start out with water. Add the plaster to the water when you are ready to get started.
Use The Appropriate Amount Of Water And Plaster
Generally speaking, you should mix one part water with one part plaster. If you want to create a full bucket's worth of plaster, you should start off with half a bucket of water. Fill the rest of the bucket with plaster and mix it up. Once you do that, you should have all of the plaster you need. If you have too much water -- or too much plaster -- you may wind up with a mixture that won't work for you.
If you are prepared for the challenges of plastering, you should be able to plaster your walls without an issue! See a great site about plastering and keep these suggestions at the forefront of your mind as you prepare to plaster your walls. These tips will help you to avoid any and all major problems.